1. The valve body is sturdy, simple in structure, and has a long service life.
2. In the failure state, the trap is fully open, and water will accumulate in the pipeline or equipment.
3. Resistant to water hammer, the barrels opened will not be damaged or flattened by water hammer.
4. Strong anti-back pressure capability, suitable for recycling system.
5. Anti-fouling, the hydrophobic hole is located at the top of the valve body, impurities in the pipeline will not accumulate at the valve hole, and small particles of impurities are flushed out through the orifice.
6, built-in filter, saving installation cost and space.
7. The check valve installed at the inlet can be used for superheated steam system.
8. Stainless steel and hardened valve core and valve seat are used, which are wear-resistant and corrosion-resistant. Hardened valve core and valve seat, wear-resistant and corrosion-resistant.
9. The trap of the inverted bucket drains water at the steam saturation temperature, and drains the air at the saturation temperature without condensing gas.
10. There is an inspection hole on the upper cover of the inverted bucket, and a valve for inspection can be installed. After opening, you can know whether the steam trap is working normally.
11. Optional built-in check valve is available for condensate recovery system, saving installation space and installation cost.
Service Hotline
+86-513-87380886
Quality Assurance
Worry-free service